Vibratory Equipment
VibraHone ™ Vibratory Bowls and High-Energy Mass Finishing Equipment provide high-energy, high-amplitude finishing, polishing, preplating and deburring and can utilize the full spectrum of Vibra Finish media.
 » FCV-ULE-2 SERIES
- High Frequency/High Amplitude Vibratory Mass Finishing
- (3) Models 3, 5.3 & 10.6 CU. FT. Capacities
- Heavy-Duty Motor
- AC Tech Inverter/Controller
- 230V/460V Dual Voltage with Waterproof ON/OFF Switch
- Rugged Polyurethane Liner
- Variable Speed Control
- Adjustable Amplitude and Lead Angle
- Manual Hand Dam Control
- Convenient Discharge Door
- Curved-Wall Construction
- Low-Profile Design
- Extended Screen Deck
- Easily Changeable Drain Plug
“ Curved wall design, 1800rpm, variable speed drive, extended screen deck, internal separation. Increases operating efficiency, reduces down time, keeps production lines running, increases overall operational efficiency.”
| |
FCV-85ULE-2 |
FCV-150ULE-2 |
FCV-300ULE-2 |
| CUBIC FEET
| 3 |
5.3 |
10.6 |
| CHANNEL WIDTH
| 8.5 |
10.2 |
12.8 |
| BOWL OD
| 39.2" |
44.3" |
54.3" |
| BOWL HEIGHT
| 35.4" |
38.2" |
42.5" |
| SHIP WT LBS |
1050 |
1200 |
2200 |
| MOTOR HP
| 1.5 |
2.0 |
3.0 |
 » VibraHome ™ FSV Series
- High Frequency/High Amplitude Vibratory Mass Finishing
- (2) Models 1 & 2 CU. FT. Capacities
- 1.0 HP, 1800 RPM Direct Drive Motor
- 110V Waterproof ON/OFF Switch
- Flow-Thru Solution Control Flow Meter
- 3/8" Thick Polyurethane Lining
- Adjustable Amplitude and Lead Angle
- Straight-Wall Construction Compact, Space-Saving Design
“ 110 volt allowing greater portability and flexibility of use. Used for smaller volumes. Manual separation required.”
| |
FSV025 |
FSV050 |
|
| CUBIC FEET
| 1.0 |
2.0 |
|
| CHANNEL WIDTH
| 6.0" |
8.5" |
|
| BOWL OD
| 20" |
28" |
|
| BOWL HEIGHT
| 35" |
35" |
|
| SHIP WT LBS |
200 |
270 |
|
| MOTOR HP
| 1.0 |
1.0 |
|
 » CB SERIES
- High Efficiency & Ease of Operation
- (3) Models of Increasing Capacity
- Heavy-Duty Motor
- AC Tech Inverter/Controller
- Two-Way ON/OFF Switch
- Planetary Drive System
- Variable Speed Control
- Dual Centrifugal Working Forces
- Uniform part chamfer, debur & polish
- AC Electromagnetic brake
- Control Panel Adjustments
| |
CB-30 |
CB-60 |
CB-100 |
| BARREL SPEED
| 0-180 |
0-170 |
0-160 |
| MOTOR (KW)
| 1.5 |
3.7+0.55 |
5.5+0.55 |
| BARREL CAPACITY (L)
| 4*7.5 |
4*15 |
4*25 |
| DIMENSIONS (mm)
| 1150*1000*1200 |
1200*1100*1430 |
1480*1340*1620 |
| WEIGHT (Kg) |
500 |
800 |
900 |
| MAX LOAD (Kg)
| 17 |
35 |
60 |
| 
